Additions:
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
{{linkunit2}}
Additions:
{{sourcebigbox2}}
{{sourcebigbox2}}
Deletions:
{{source4}}
{{source4}}
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
No differences.
Additions:
**WARNING:** Take care not to breath in brake dust. Brake dust is filled with asbestos which causes mesothelioma cancer and or tumor. Mesothelioma destroys tissue and organs and have the potential to spread to other parts of the body. Always clean brake parts with a certified brake parts cleaner before working on the brake system. This will reduce the amount of exposure to asbestos.
1. Clean piston and area around lock and guide pins. Install inner pad. Seat piston by placing lever through opening in [[BrakeCaliperS13 caliper]] body and pushing piston into bore. Apply brake grease to pad retainer points on caliper assembly. Install outer pad and shims.
2. Rotate [[BrakeCaliperS13 caliper]] upward. Remove pads and pad shims. Note locations and condition of pads for proper installation (if reusable). Minimum pad thickness is .08" (2.0 mm).
===''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''===
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
Deletions:
**WARNING: Take care not to breath in brake dust. Brake dust is filled with asbestos which causes mesothelioma cancer and or tumor. Mesothelioma destroys tissue and organs and have the potential to spread to other parts of the body. Always clean brake parts with a certified brake parts cleaner before working on the brake system. This will reduce the amount of exposure to asbestos.**
1. Clean piston and area around lock and guide pins. Install inner pad. Seat piston by placing lever through opening in caliper body and pushing piston into bore. Apply brake grease to pad retainer points on caliper assembly. Install outer pad and shims.
2. Rotate caliper upward. Remove pads and pad shims. Note locations and condition of pads for proper installation (if reusable). Minimum pad thickness is .08" (2.0 mm).
>>WARNING: Take care not to breath in brake dust. Brake dust is filled with asbestos which causes mesothelioma cancer and or tumor. Mesothelioma destroys tissue and organs and have the potential to spread to other parts of the body. Always clean brake parts with a certified brake parts cleaner before working on the brake system. This will reduce the amount of exposure to asbestos.>> ====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
Additions:
**WARNING: Take care not to breath in brake dust. Brake dust is filled with asbestos which causes mesothelioma cancer and or tumor. Mesothelioma destroys tissue and organs and have the potential to spread to other parts of the body. Always clean brake parts with a certified brake parts cleaner before working on the brake system. This will reduce the amount of exposure to asbestos.**
>>WARNING: Take care not to breath in brake dust. Brake dust is filled with asbestos which causes mesothelioma cancer and or tumor. Mesothelioma destroys tissue and organs and have the potential to spread to other parts of the body. Always clean brake parts with a certified brake parts cleaner before working on the brake system. This will reduce the amount of exposure to asbestos.>> ====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
Deletions:
>>{{autotorquewrench}}>> ====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
Additions:
>>{{autotorquewrench}}>> ====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
Deletions:
====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
Additions:
===''FRONT BRAKE PADS''===
Deletions:
>>{{source2}}>> ===''FRONT BRAKE PADS''===
No differences.
Additions:
>>{{source2}}>> ===''FRONT BRAKE PADS''===
{{source4}}
Deletions:
===''FRONT BRAKE PADS''===
Additions:
----
====''TORQUE SPECIFICATIONS Ft. Lbs. (N.m)''====
~-Backing Plate Mount Bolt/Nut (Rear): 28-38 (38-52)
~-Booster Input Rod Lock Nut: 12-16 (16-22)
~-Brake Line Bolt: 12-14 (16-19)
~-Brake Line Flare Nut: 11-13 (15-18)
~-Brake Pedal Fulcrum Shaft Nut: 12-16 (16-22)
~-Caliper-To-Torque Member Bolt: 16-23 (22-31)
~-Torque Member-To-Mount Bolt:
~-Front: 53-72 (72-97)
~-Rear: 28-38 (38-52)
~-Wheel Lug Nuts: 72-87 (98-118)
Additions:
===''FRONT BRAKE PADS''===
===''REAR BRAKE PADS''===
Deletions:
==''FRONT BRAKE PADS''==
==''REAR BRAKE PADS''==
Additions:
{{image url="http://www.garage411.com/images/Nissan/S13/brakes/brakes2.gif" title="text" alt="text"}}
{{image url="http://www.garage411.com/images/Nissan/S13/brakes/brakes3.gif" title="text" alt="text"}}
Additions:
==''FRONT BRAKE PADS''==
==''REAR BRAKE PADS''==
Deletions:
====''FRONT BRAKE PADS''====
====''REAR BRAKE PADS''====