Additions:
~-[[CamGearS2k S2000 cam gear removal and installation]]>> {{sourcebigbox2}}
{{sourcebigbox2}}
Deletions:
~-[[CamGearS2k S2000 cam gear removal and installation]]
{{source1}}>> {{sourcebigbox2}}
{{source4}}
Additions:
>>**Related Content**
~-[[CamGearS2k S2000 cam gear removal and installation]]
{{source1}}>> {{sourcebigbox2}}
1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on [[CylinderHeadS2k Cylinder Head]] Removal ).
[[HondaS2000 Honda S2000 AP1]]
{{linkunit2}}
Deletions:
>>**RELATED CONTENT**
~-[[CamGearS2k S2000 cam gear removal and installation]]>> {{sourceslim}}
>>{{source1}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on [[CylinderHeadS2k Cylinder Head]] Removal ).
Additions:
**FYI:** Do not rotate the camshaft during inspection.
>>{{source1}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on [[CylinderHeadS2k Cylinder Head]] Removal ).
3. Remove the [[CylinderHeadS2k cylinder head]] cover (see step 22 on Cylinder Head Removal ).
**FYI:** Apply new engine oil to the bolt threads.
9. Seat the camshafts by pushing them toward the rear end of the [[CylinderHeadS2k cylinder head]].
13. Remove the camshaft mounting bolts, dowel pins and camshaft plates on both camshafts. Wipe them clean and lubricate the mounting bolt threads with clean engine oil. Torque the bolts to 39 Nm (4.0 kgf.m, 29 lbf.ft).
14. Clean the camshaft journal surfaces in the [[CylinderHeadS2k cylinder head]], then set the camshafts back in place. Place a plastigage strip across each journal.
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
Deletions:
**FYI: Do not rotate the camshaft during inspection.**
>>{{source1}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on Cylinder Head Removal ).
3. Remove the cylinder head cover (see step 22 on Cylinder Head Removal ).
**FYI: Apply new engine oil to the bolt threads.**
9. Seat the camshafts by pushing them toward the rear end of the cylinder head.
13. Remove the camshaft mounting bolts (A), dowel pins (B) and camshaft plates (C) on both camshafts. Wipe them clean and lubricate the mounting bolt threads with clean engine oil. Torque the bolts to 39 Nm (4.0 kgf.m, 29 lbf.ft).
14. Clean the camshaft journal surfaces in the cylinder head, then set the camshafts back in place. Place a plastigage strip across each journal.
Additions:
>>{{source1}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on Cylinder Head Removal ).
Deletions:
>>{{source2}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on Cylinder Head Removal ).
Additions:
>>{{source2}}>> 1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on Cylinder Head Removal ).
Deletions:
1. Remove the dipstick, positive crankcase ventilation (PCV) hose and breather hose (see step 18 on Cylinder Head Removal ).
Additions:
>>**RELATED CONTENT**
~-[[CamGearS2k S2000 cam gear removal and installation]]>> {{sourceslim}}