Honda Civic EG Cooling System

Honda Civic 1992-1995 EG

COOLING SYSTEM BLEEDING

1. Set heater controls to maximum heat. Fill cooling system with a 50/50 mixture of coolant and water tobottom of filler neck. Loosen bleed bolt, located on thermostat housing.
2. Tighten bleed bolt when coolant flows from bleed bolt in steady stream without bubbles. With radiatorcap off, start and operate engine to normal operating temperature (fan comes on at least twice). Add coolant as necessary. Install radiator cap.

COOLING SYSTEM SPECIFICATIONS - SOHC AND DOHC ENGINES

Coolant Replacement Interval:

• 45,000 miles initially; 30,000 miles thereafter.

Coolant Capacity Including heater core and reservoir (AT):

• 1.5L Engine: 4.6 Qts. (4.4L)
• 1.6L Engine: 5.0 Qts. (4.7L)

Coolant Capacity Including heater core and reservoir (MT):

• 1.5L Engine (D15B7 & D15B8): 4.8 Qts. (4.5L)
• 1.5L Engine (D15Z1): 4.6 Qts. (4.4L)
• 1.6L Engine (B16A3): 5.1 Qts. (4.8L)
• 1.6L Engine (D16Z6): 4.6 Qts. (4.4L)

Pressure Cap:

• 14-18 psi

Thermostat Opens:

• Starts
  • 1.5L: 179-183°F (80-84°C)
  • 1.6L: 169-179°F (76-80°C)
• Full Open
  • 1.5L: 203°F (95°C)
  • 1.6L: 194°F (90°C)

Did you find this repair info helpful or are improvements needed? Please leave comments below.

Honda Civic 1992-1995 EG

---