Garage411 : EngineRemovalS2k

Revision [4235]

Last edited on 2009-09-18 23:30:43 by Spartanic23
Additions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>> {{googlest1}} ======''S2000 Engine F20C Removal''====== {{googlest2}}
Deletions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>> {{googlest1}} =====''S2000 Engine F20C Removal''===== {{googlest2}}

Revision [3608]

Edited on 2009-07-08 21:40:31 by Spartanic23 [revised]

No differences.

Revision [3607]

Edited on 2009-07-08 21:39:43 by Spartanic23 [revised]
Additions:
{{source4}}

Revision [3365]

Edited on 2009-07-04 09:36:38 by Spartanic23 [revised]
Additions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>> {{googlest1}} =====''S2000 Engine F20C Removal''===== {{googlest2}}
Deletions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]
{{source1}}>> {{googlest1}} =====''S2000 Engine F20C Removal''===== {{googlest2}}

Revision [3255]

Edited on 2009-06-23 19:32:25 by Spartanic23 [Title revised]
Additions:
{{source1}}>> {{googlest1}} =====''S2000 Engine F20C Removal''===== {{googlest2}}
Deletions:
{{source1}}>> {{googlest1}} =====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''===== {{googlest2}}

Revision [3200]

Edited on 2009-06-21 14:08:21 by Spartanic23 [revised]
Additions:
1. Remove the hood support rod from the driver's side of your s2k, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].
15. Raise your Honda S2000 (s2k) on the hoist to full height.
20. Lower your S2k on the hoist.
32. Carefully raise s2k F20C engine all the way, and remove it from the vehicle.
Deletions:
1. Remove the hood support rod from the driver's side of the car, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].
15. Raise your Honda S2000 on the hoist to full height.
20. Lower the vehicle on the hoist.
32. Carefully raise the S2000 F20C engine all the way, and remove it from the vehicle.

Revision [3166]

Edited on 2009-06-20 13:25:25 by Spartanic23 [revised]
Additions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]
{{source1}}>> {{googlest1}} =====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''===== {{googlest2}}
**TIP**
{{sourcebigbox2}}
{{sourcebigbox2}}
{{linkunit2}}
Deletions:
{{googlest1}} =====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''===== {{googlest2}}
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>>----
{{sourceslim}}
>>{{autoenginehoist}}>> **TIP**
{{source4}}

Revision [2917]

Edited on 2009-06-17 21:03:59 by Spartanic23 [test section targeting]
Additions:
{{googlest1}} =====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''===== {{googlest2}}
Deletions:
=====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''=====

Revision [2844]

Edited on 2009-06-16 19:32:13 by FreeMan [revised]
Additions:
=====''Honda S2000 2.0L Engine Swap Removal - AP1 F20C''=====
[[HondaS2000 Honda S2000 AP1]]
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>>----
{{sourceslim}}
6. Disconnect the engine control module (ECM or ECU) connectors from the ECM. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova2.gif See image]].
7. Disconnect the main wire harness connector.
9. Remove the throttle cable by loosening the locknut, then slipping the cable end out of the accelerator linkage. Take care not to bend the cable when removing it. Always replace any kinked cable with a new one. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova4.gif See image]].
10. Remove the four bolts securing the electrical power steering (EPS) control unit. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova5.gif See image]].
11. Remove the battery cable from the main under-hood fuse/relay box, then remove the harness clamps. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova6.gif See image]].
12. Remove the battery cable from the auxiliary under-hood fuse box, and remove the ground cable and harness clamps. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova7.gif See engine]].
13. Remove the grommet, then pull out the ECM connectors.
19. Remove the F20C engine stop bracket cushion, then remove the engine stop bracket. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova8.gif See image]].
21. Remove the heater hoses and lower radiator hose. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova9.gif See image]].
24. Remove the fuel feed hose, fuel return hose and brake booster vacuum hose. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova11.gif See image]].
29. Remove the support nut and four mounting bolts, then remove the right side engine mount bracket. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova17.gif See image]].
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
[[HondaS2000 Honda S2000 AP1]]
Deletions:
=====''Honda S2000 2.0L Engine Removal - AP1 F20C''=====
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal Swap
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>> {{sourceslim}}
6. Disconnect the engine control module (ECM or ECU) connectors (A) from the ECM. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova2.gif See image]].
7. Disconnect the main wire harness connector (B).
9. Remove the throttle cable (A) by loosening the locknut (B), then slipping the cable end out of the accelerator linkage. Take care not to bend the cable when removing it. Always replace any kinked cable with a new one. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova4.gif See image]].
10. Remove the four bolts (A) securing the electrical power steering (EPS) control unit (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova5.gif See image]].
11. Remove the battery cable (A) from the main under-hood fuse/relay box, then remove the harness clamps (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova6.gif See image]].
12. Remove the battery cable (A) from the auxiliary under-hood fuse box, and remove the ground cable (B) and harness clamps (C). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova7.gif See engine]].
13. Remove the grommet (D), then pull out the ECM connectors.
19. Remove the F20C engine stop bracket cushion (A), then remove the engine stop bracket (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova8.gif See image]].
21. Remove the heater hoses (A) and lower radiator hose (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova9.gif See image]].
24. Remove the fuel feed hose (A), fuel return hose (B) and brake booster vacuum hose (C). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova11.gif See image]].
29. Remove the support nut (A) and four mounting bolts (B), then remove the right side engine mount bracket (C). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova17.gif See image]].
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal Swap

Revision [1884]

Edited on 2009-05-14 23:17:11 by Spartanic23 [revised]
Additions:
>>{{autoenginehoist}}>> **TIP**
1. Remove the hood support rod from the driver's side of the car, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].
Deletions:
**TIP**
>>{{source1}}>> 1. Remove the hood support rod from the driver's side of the car, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].

Revision [1650]

Edited on 2009-05-06 21:41:38 by MasterBlaster [refined text]
Additions:
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal Swap
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal Swap
Deletions:
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal

Revision [1631]

Edited on 2009-05-06 14:28:15 by Spartanic23 [refined text]
Additions:
6. Disconnect the engine control module (ECM or ECU) connectors (A) from the ECM. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova2.gif See image]].
15. Raise your Honda S2000 on the hoist to full height.
19. Remove the F20C engine stop bracket cushion (A), then remove the engine stop bracket (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova8.gif See image]].
32. Carefully raise the S2000 F20C engine all the way, and remove it from the vehicle.
Deletions:
6. Disconnect the engine control module (ECM) connectors (A) from the ECM. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova2.gif See image]].
15. Raise the vehicle on the hoist to full height.
19. Remove the engine stop bracket cushion (A), then remove the engine stop bracket (B). [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova8.gif See image]].
32. Raise the engine all the way, and remove it from the vehicle.

Revision [1591]

Edited on 2009-05-04 22:04:58 by Spartanic23 [refined content]
Additions:
>>{{source1}}>> 1. Remove the hood support rod from the driver's side of the car, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].
8. Remove the vacuum tank. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova3.gif See image]].
Deletions:
1. Remove the hood support rod from the driver's side of the car, then use it as shown to fix the hood in a vertical position. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova1.gif See image]].
8. Remove the vacuum tank. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova3.gif See image]]. >>{{source2}}>>

Revision [1507]

Edited on 2009-05-01 23:48:31 by Spartanic23
Additions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>> {{sourceslim}}
Deletions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>>

Revision [1218]

Edited on 2009-04-28 18:32:14 by MasterBlaster
Additions:
[[HondaS2000 Honda S2000 AP1]] F20C Engine Swap Removal
{{source4}}
Deletions:
Honda S2000 AP1 F20C Engine Swap Removal
[[HondaS2000 Honda S2000]]

Revision [1046]

Edited on 2009-04-27 18:48:15 by Spartanic23
Additions:
8. Remove the vacuum tank. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova3.gif See image]]. >>{{source2}}>>
Deletions:
>>{{source2}}>>
8. Remove the vacuum tank. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova3.gif See image]].

Revision [1045]

Edited on 2009-04-27 18:47:59 by Spartanic23
Additions:
>>{{source2}}>>
7. Disconnect the main wire harness connector (B).
Deletions:
7. Disconnect the main wire harness connector (B). >>{{source2}}>>

Revision [1044]

Edited on 2009-04-27 18:46:28 by Spartanic23
Additions:
5. Remove the transmission.
7. Disconnect the main wire harness connector (B). >>{{source2}}>>
Deletions:
5. Remove the transmission
7. Disconnect the main wire harness connector (B).

Revision [1007]

Edited on 2009-04-26 12:26:51 by Spartanic23
Additions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]>>
27. Attach the chain hoist to the engine as shown. Take care not to damage the VTEC solenoid valve.
{{image url="http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova15.gif" title="text" alt="text"}}
Deletions:
~-[[http://www.garage411.com/EngineInstallS2k Honda S2000 Engine Install]]
~-[[http://en.wikipedia.org/wiki/Honda_F20C_engine Wikipedia facts and info on Honda's F20C engine]]>>
27. Attach the chain hoist to the engine as shown. Take care not to damage the VTEC solenoid valve. [[http://www.garage411.com/images/Honda/Ap1/Engine/EngineRemova15.gif See image]].

Revision [647]

The oldest known version of this page was created on 2009-03-29 20:12:36 by Spartanic23
Page History :: 2009-09-18 23:30:43 feed icon :: Owner: MasterBlaster ::
Valid XHTML 1.0 Transitional :: Valid CSS
Page was generated in 0.1007 seconds