Additions:
**CAUTION:** Always relieve fuel pressure before disconnecting any fuel injectionrelated component. DO NOT allow fuel to contact engine or electrical components.
{{sourcebigbox2}}
{{sourcebigbox2}}
{{linkunit2}}
Deletions:
>>{{sourcebigbox}}>> **CAUTION:** Always relieve fuel pressure before disconnecting any fuel injectionrelated component. DO NOT allow fuel to contact engine or electrical components.
{{source4}}
Additions:
=====''Nissan 240sx Fuel System S13: rails, injectors pumps and more''=====
>>{{sourcebigbox}}>> **CAUTION:** Always relieve fuel pressure before disconnecting any fuel injectionrelated component. DO NOT allow fuel to contact engine or electrical components.
===''TORQUE SPECIFICATIONS''===
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
Deletions:
=====''Nissan 240sx Fuel System S13''=====
>>{{sourcebigbox}}>> **CAUTION: Always relieve fuel pressure before disconnecting any fuel injectionrelated component. DO NOT allow fuel to contact engine or electrical components.**
==''TORQUE SPECIFICATIONS''==
Additions:
==''FUEL PUMP REMOVAL AND INSTALLATION''==
Clean exterior of fuel injector. Install NEW "O" rings on fuel injectors. Install injectors and fuel rail. Install EGR backpressure transducer valve. Pressurize fuel system and check for leaks.
Deletions:
==''FUEL PUMP''==
**Removal & Installation**
Clean injector exterior. Install NEW "O" rings on injectors. Install injectors and fuel rail. Install EGR backpressure transducer valve. Pressurize fuel system and check for leaks.
Additions:
==''TORQUE SPECIFICATIONS''==
~-Fuel Rail Bolt: 16-19 Ft. Lbs. (22-26 N.m.)
~- Fuel Injector Holder Screw: 20-24 INCH Lbs. (2.2-2.7 N.m)
{{source4}}
Deletions:
{{sourceslim}}
The oldest known version of this page was created on
2009-05-06 17:46:44 by MasterBlaster
[New]