Additions:
=====''Nissan 240sx S13 Wheel Alignment: Pre-Alignment Inspection Procedures''=====
===''PRE-ALIGNMENT CHECKS''===
Before making wheel alignment adjustment, perform the following checks:
1. Tires should be equal in size and runout must not be excessive. Tires and wheels should be in balance, and inflated to manufacturer's specifications.
2. Wheel bearings must be properly adjusted. Steering linkage and suspension must not have excessive looseness. Check for wear in tie rod ends and ball joints.
3. Steering gear box must not have excessive play. Check and adjust to manufacturer's specifications.
4. Vehicle must be at curb height with full fuel load and spare tire in vehicle. No extra load should be on vehicle.
5. Vehicle must be level with floor and with suspension settled. Jounce front and rear of vehicle several times and allow it to settle to normal curb height.
6. If steering wheel is not centered with front wheels in straight-ahead position, correct by shortening one tie rod adjusting sleeve and lengthening opposite sleeve equal amounts.
7. Ensure wheel lug nuts are tightened to torque specifications.
Deletions:
=====''Nissan 240sx S13 Jacking and Hoisting''=====
**NOTE:** Illustration given is not intended to represent exact structure of vehicle frames, underbody or body outline. Illustrations are provided only to give a point of reference when lifting or hoisting.
===''FLOOR JACK AND HOIST''===
Using a floor jack or hoist, lift vehicle at points indicated by shaded areas on frame. See Fig. 1 .
**Fig. 1: Vehicle Frame, Underbody and Outerbody Points**
{{image url="http://www.garage411.com/images/Nissan/S13/Suspension/WheelAlignment/wheelalignment.gif" title="wheelalignment" alt="wheelalignment"}}
===''EMERGENCY JACKING''===
Those points designated on the outline of the body were specifically designed to facilitate use of manufacturer's supplied jack. These jacking points are indicated by shaded areas. See Fig. 1 .