Safety in the Garage

Engine Performance Safety Precautions

• Always refer to Emission Decal in engine compartment before servicing vehicle. If manual and decal differ, always use decal specifications.
• Do not allow or create a condition of misfire in more than one cylinder for an extended period of time. Damage to converter may occur due to loading converter with unburned air/fuel mixture.
• Always turn ignition off and disconnect negative battery cable BEFORE disconnecting or connecting computer or other electrical components.
• DO NOT drop or shock electrical components such as computer, airflow meter, etc.
• DO NOT use fuel system cleaning compounds that are not recommended by the manufacturer. Damage to gaskets, diaphragm materials and catalytic converter may result.
• Before performing a compression test or cranking engine using a remote starter switch, disconnect coil wire from distributor and secure it to a good engine ground, or disable ignition.
• Before disconnecting any fuel system component, ensure fuel system pressure is released.
• Use a shop towel to absorb any spilled fuel to prevent fire.
• DO NOT create sparks or have an open flame near battery.
• If any fuel system components such as hoses or clamps are replaced, ensure they are replaced with components designed for fuel system use.
• Always reassemble throttle body components with new gaskets, "O" rings and seals.
• If equipped with an inertia switch, DO NOT reset switch until fuel system has been inspected for leaks.
• Wear safety goggles when drilling or grinding.
• Wear proper clothing which protects against chemicals and other hazards.