Garage411 : SpecsEg

Honda Civic EG and EJ Specifications

Honda Civic 1992-1995

Use this article to quickly find specifications related to servicing, adjustments and just about everything. This is a quick reference article to use when you are familiar with an adjustment procedure and only need a specification.



CAPACITIES


BATTERY SPECIFICATIONS

FLUID CAPACITIES



SERVICE INTERVALS AND SPECIFICATIONS


REPLACEMENT INTERVALS

BELT ADJUSTMENT - Deflection - In. (mm)



MECHANICAL CHECKS


ENGINE COMPRESSION
Check engine compression at specified cranking speed, with engine at normal operating temperature, all spark plugs removed and throttle wide open.

ENGINE COMPRESSION - Maximum variation between cylinders is 28 psi (2.0 kg/cm2 )

VALVE CLEARANCE ADJUSTMENT SPECIFICATIONS



IGNITION SYSTEM


IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

DISTRIBUTOR SENSORS
Triggering of fuel injectors is dependent upon pulsed voltage signals generated by TDC/CKP/CYP sensors.

TDC/CKP/CYP SENSOR RESISTANCE

HIGH TENSION WIRE RESISTANCE

SPARK PLUG TYPE

SPARK PLUG SPECIFICATIONS

FIRING ORDER AND TIMING MARKS
text
text
IGNITION TIMING - Degrees BTDC @ RPM



FUEL SYSTEM


REGULATED FUEL PRESSURE
Measure pressure w/vacuum hose connected & disconnected from press. regulator.

FUEL INJECTOR RESISTANCE



IDLE SPEED AND CO MIXTURE


IDLE SPEED SPECIFICATIONS
With Electronic Air Control Valve (EACV) disconnected, headlights and cooling fan off, and transmission in Neutral or Park.

IDLE CO LEVEL

THROTTLE POSITION (TP) SENSOR



Did you find this repair info helpful or are improvements needed? Please leave comments below.

Honda Civic 1992-1995

There are 11 comments on this page. [Display comments]

Valid XHTML 1.0 Transitional :: Valid CSS
Page was generated in 0.0614 seconds