No differences.
Additions:
==''WIPER MOTOR''==
{{sourcebigbox2}}
==''WIPER RELAY''==
{{sourcebigbox2}}
===''REMOVAL AND INSTALLATION''===
{{sourcebigbox2}}
{{linkunit2}}
Deletions:
<<{{source2}}<< ==''WIPER MOTOR''==
>>{{sourcebigbox}}>> ==''WIPER RELAY''==
>>{{source1}}>> ===''REMOVAL AND INSTALLATION''===
No differences.
Additions:
=====''Nissan 240sx Wiper and Washer System S13: adjustments, tests, relays and more''=====
2. Set blade so that centerline of wiper blade is at specified distance from edge of glass in the STOP position (horizontal stop wipers). On vertical stop wipers, the distance is measured from centerline of wiper blade to edge of black print on glass. Tighten wiper arm nut.
>>{{source1}}>> ===''REMOVAL AND INSTALLATION''===
**FYI:** Before installing wiper arm(s), wiper motor must be cycled at lowest speed, then turned off to allow motor to find its parked position.
Remove [[SteeringS13 steering wheel pad]] and [[SteeringS13 steering wheel]]. Disconnect all wiring. Remove retaining screw or clip and pull combination switch off column. Wiper switches can be separated from combination switch. To install, reverse removal procedure. Align tab on switch with hole in column.
===''WIPER ARM TORQUE SPECIFICATIONS - FT Lbs. (N.m)''===
**Did you find this repair info helpful or are improvements needed? Please leave comments below.**
Deletions:
=====''Nissan 240sx Wiper and Washer System S13''=====
2. Set blade so that centerline of wiper blade is at specified distance from edge of glass in the STOP position (horizontal stop wipers). On vertical stop wipers, the distance is measured from centerline of wiper blade to edge of black print on glass. See table. Tighten wiper arm nut.
>>{{source1}}>> ====''REMOVAL AND INSTALLATION''====
**FYI: Before installing wiper arm(s), wiper motor must be cycled at lowest speed, then turned off to allow motor to find its parked position.**
Remove steering wheel pad and steering wheel. Disconnect all wiring. Remove retaining screw or clip and pull combination switch off column. Wiper switches can be separated from combination switch. To install, reverse removal procedure. Align tab on switch with hole in column.
==''WIPER ARM TORQUE SPECIFICATIONS - FT Lbs. (N.m)''==
Additions:
Nissan's 240SX S13 is equipped with a 2-speed wiper system with time delay feature. Some models are equipped with a rear wiper/washer system.
<<{{source2}}<< ==''WIPER MOTOR''==
Deletions:
>>{{source1}}>> Nissan's 240SX S13 is equipped with a 2-speed wiper system with time delay feature. Some models are equipped with a rear wiper/washer system.
==''WIPER MOTOR''==
Additions:
>>{{source1}}>> Nissan's 240SX S13 is equipped with a 2-speed wiper system with time delay feature. Some models are equipped with a rear wiper/washer system.
>>{{sourcebigbox}}>> ==''WIPER RELAY''==
>>{{source1}}>> ====''REMOVAL AND INSTALLATION''====
**Installation**
Deletions:
Nissan's 240SX S13 is equipped with a 2-speed wiper system with time delay feature. Some models are equipped with a rear wiper/washer system.
==''WIPER RELAY''==
====''REMOVAL AND INSTALLATION''====